Difference between revisions of "Project Product Description Template"
m (Frank moved page Project Product Description Template 2017 to Project Product Description Template)
|Line 91:||Line 91:|
| || || ||
| || || ||
Latest revision as of 09:56, 20 September 2018
Download Product Description Template
The Project Product Description is a special form of Product Description that defines what the project must deliver in order to gain acceptance. It is used to:
- Gain agreement from the user on the project’s scope and requirements
- Define the customer’s quality expectations
- Define the acceptance criteria, method and responsibilities for the project.
The Product Description for the project product is created in the Starting up a Project process as part of the initial scoping activity, and is refined during the Initiating a Project process when creating the Project Plan. It is subject to formal change control and should be checked at stage boundaries (during Managing a Stage Boundary) to see if any changes are required. It is used by the Closing a Project process as part of the verification that the project has delivered what was expected of it, and that the acceptance criteria have been met.
Advice The Project Product Description is derived from the project mandate, discussions with the Senior User and Executive – possibly via scoping workshops and the request for proposal (if in a commercial customer/supplier environment). A Product Description for the project product can take a number of formats, including: Document, presentation slides or mind map; or Entry in a project management tool.
The following quality criteria should be observed:
- The purpose is clear
- The composition defines the complete scope of the project
- The acceptance criteria form the complete list against which the project will be assessed
- The acceptance criteria address the requirements of all the key stakeholders (e.g. operations and maintenance)
- The Project Product Description defines how the users and the operational and maintenance organizations will assess the acceptability of the finished product(s):
- All criteria are measurable
- Each criterion is individually realistic
- The criteria are realistic and consistent as a set. For example, high quality, early delivery and low cost may not go together
- All criteria can be proven within the project life (e.g. the maximum throughput of a water pump), or by proxy measures that provide reasonable indicators as to whether acceptance criteria will be achieved post-project (e.g. a water pump that complies with design and manufacturing standards of reliability)
- The quality expectations have considered:
- The characteristics of the key quality requirements (e.g. fast/slow, large/small, national/global)
- The elements of the customer’s quality management system that should be used
- Any other standards that should be used
- The level of customer/staff satisfaction that should be achieved if surveyed.
(Name by which the project is known)
(This defines the purpose that the project’s product will fulfil and who will use it. It is helpful in understanding the product’s functions, size, quality, complexity, robustness etc.)
(Description of the major products to be delivered by the project)
(What are the source products from which this product is derived? Examples are: Existing products to be modified; design specifications; a feasibility report or project mandate)
Development Skills Required
(An indication of the skills required to develop the product, or a pointer to which area(s) should supply the development resources)
Customer’s Quality Expectations
(A description of the quality expected of the project’s product and the standards and processes that will need to be applied to achieve that quality. They will impact on every part of the product development, and thus on time and cost. The quality expectations are captured in discussions with the customer. Where possible, expectations should be prioritized)
|Acceptance Criteria||Project Level Quality Tolerances||Acceptance Method||Acceptance Responsibilities |
- A prioritized list of criteria that the project’s product must meet before the customer will accept it - i.e. measurable definitions of the attributes that must apply to the set of products to be acceptable to key stakeholders (and, in particular, the users and the operational and maintenance organizations). Examples are: ease of use, ease of support, ease of maintenance, appearance, major functions, development costs, running costs, capacity, availability, reliability, security, accuracy or performance
- Specifying any tolerances that may apply for the acceptance criteria
- Stating the means by which acceptance will be confirmed. This may simply be a case of confirming that all the project’s products have been approved or may involve describing complex handover arrangements for the project’s product, including any phased handover of the project’s products
- Defining who will be responsible for confirming acceptance