The purpose of the Controlling a Stage process (CS) is for the Project Manager to assign the work to be done, monitor this work, deal with issues, report progress to the Project Board and take corrective action to ensure that the stage remains within tolerance.
The objective of the Controlling a Stage process is to ensure that:
The Controlling a Stage process describes the work of the Project Manager as they do their day-to-day management of a stage, and it is where the Project Manager does most of their work.
During a stage the Project Manager will repeat the following tasks:
- Authorize the work to be done (give out work in Work Packages to the Team Managers).
- Monitor progress information for this work using Checkpoint Reports and Quality Register.
- Review the current situation in relation to the Stage Plan, sign off completed work and issue new Work Packages.
- Report to the Project Board using the Highlight Report.
- Watch for issues, assess issues and deal with issues and risks.
- Take any necessary corrective action.
As mentioned above, the Project Manager will keep repeating these tasks until all the planned products for the stage have been completed and then start to prepare for the Managing a Stage Boundary process. This whole sequence of activities is again repeated for each stage in the project.
At the end of the last stage, the Closing a Project process will be invoked and therefore, the Project Manager will start to prepare the project for closure.
- Authorize a Work Package – Assign and agree with the Team Manager.
- Review Work Package Status – Check on Work Package progress.
- Receive completed Work Package – Check quality and Configuration Management.
- Review the stage status – Continually compare status to Stage Plan.
- Report Highlights – Regular reports to the Project Board.
- Capture and examine issues & risks – Categorizing and assess impact.
- Escalate issues and risks – Create Exception Report and send to the Project Board.
- Take corrective action – Solve issues while keeping stage within tolerance.
- Highlight Reports are used to keep the Project Board up to date on the stage progress.
- The Project Manager constantly reviews Issues, Risk and Quality and therefore updates the Issue, Risk and Quality registers.
- Issue Reports (includes Change Requests) are used to escalate issues to the Project Board.
- Exception Reports are used to report if the stage is out of tolerance or is forecast to be.
- The Stage Boundary process commences near the end of the current stage.